如何使用水泥撒布車控制水泥用量？

How to use a cement spreader to control the amount of cement used?

　　水泥撒布車控制水泥用量的過程如下：

The process of controlling the amount of cement used by a cement spreader is as follows:

　　在自動施工狀態下，首先清零操作電腦上的累計米數，通常通過選擇右上角的清零按鍵來實現。

In automatic construction mode, the first step is to reset the accumulated meters on the computer, usually by selecting the reset button in the upper right corner.

　　記錄施工前車載物料的重量。

Record the weight of on-board materials before construction.

　　根據實際施工要求，如果每平方米需要20公斤的水泥，并且已知撒布寬度為2.5米，那么撒布100米所需的水泥用量為20公斤/平方米乘以2.5米乘以100米，即5000公斤。此時，如果車載物料重量為18000公斤，那么實際施工過程中需要注意電腦顯示的物料重量。

According to actual construction requirements, if 20 kilograms of cement are required per square meter and the known spreading width is 2.5 meters, the required amount of cement for spreading 100 meters is 20 kilograms per square meter multiplied by 2.5 meters multiplied by 100 meters, which is 5000 kilograms. At this point, if the weight of the on-board materials is 18000 kilograms, it is necessary to pay attention to the material weight displayed on the computer during the actual construction process.

　　在施工過程中，當車輛行駛到100米時，檢查電腦顯示的稱重?cái)?shù)值。按照每平方米20KG的要求，施工100米后電腦顯示的數值應為13000KG。如果實際數值大于13000KG，說明實際撒布量小于20KG/平方米，需要增加設定的撒布量；如果數值小于13000KG，則說明實際撒布量大于20KG/平方米，需要減少設定的撒布量。

During the construction process, when the vehicle reaches 100 meters, check the weighing value displayed on the computer. According to the requirement of 20KG per square meter, the value displayed on the computer after 100 meters of construction should be 13000KG. If the actual value is greater than 13000KG, it indicates that the actual spreading amount is less than 20KG/square meter, and the set spreading amount needs to be increased; If the value is less than 13000KG, it indicates that the actual spreading amount is greater than 20KG/square meter, and the set spreading amount needs to be reduced.

　　這個過程確保了水泥撒布車能夠根據施工要求精確控制水泥的用量。

This process ensures that the cement spreader can accurately control the amount of cement used according to construction requirements.

本文由水泥撒布車出租為您精心提供，如想了解更多請點擊我們的網站：http://www.xintangt.com，我們將會以最大的熱情為您解答!

This article is carefully provided by a cement spreader truck for rental. If you want to learn more, please click on our website: http://www.xintangt.com We will answer you with the greatest enthusiasm!