(1)拌和高效性。

(1) Mixing efficiency.

WR250冷再生拌和機最大功率可達571kW，切削性能可達24kW/cm，在水泥土施工中，理想工作量可達4000~6000m2/d(按日工作時長8h計)，單位時間內拌和水泥土方量是普通拌和機的1.7倍。

The maximum power of WR250 cold recycling mixer can reach 571kW, and the cutting performance can reach 24kW/cm. In cement soil construction, the ideal workload can reach 4000-6000m2/d (calculated based on a daily working time of 8h), and the amount of cement soil mixed per unit time is 1.7 times that of ordinary mixer.

(2)拌和均勻性。

(2) Uniformity of mixing.

冷再生拌和機采用強有力的拌和轉子且轉子升降可自動調節，能夠?qū)F(xiàn)有土壤與預撒布的水泥拌和，形成均勻的混合料。同時可調節拌和倉隨工作深度而變化，因此保證了即使在最大深度下，也能達到最高產量和良好的拌和效果。

The cold recycling mixer adopts a powerful mixing rotor and the rotor lifting can be automatically adjusted, which can mix the existing soil with pre spread cement to form a uniform mixture. At the same time, the adjustable mixing chamber varies with the working depth, ensuring that even at the maximum depth, the highest output and good mixing effect can be achieved.

(3)杰出的越野機動性。

(3) Outstanding off-road maneuverability.

輪胎體積超大、胎紋深，能夠?qū)l(fā)動機的高功率有效地傳輸給土壤，輕松適應崎嶇不平、狹窄空間調頭、惡劣土壤等施工條件，同時將施工產量提升到一個新高度。

The tire has a large volume and deep tread, which can effectively transmit the high power of the engine to the soil, making it easy to adapt to construction conditions such as roughness, narrow space turning, and harsh soil, while also increasing construction output to a new height.

(4)拌和環保性。

(4) Mixing environmental friendliness.

與普通拌和機相比，冷再生拌和機拌和罩封閉更嚴密，更貼近于地面，這就有效避免了拌和過程揚塵的產生。

Compared with ordinary mixers, the mixing hood of the cold recycling mixer is more tightly sealed and closer to the ground, which effectively avoids the generation of dust during the mixing process.

冷再生拌和機適用范圍

Scope of application of cold recycling mixer

其主要用于瀝青混凝土路面的銑刨以及添加瀝青、水等材料后的舊瀝青路面回收料的再生；也用于高速公路、城鄉道路、機場、碼頭、停車場等工程的基層、底層穩定土現場就地拌和作業。

It is mainly used for milling and planing asphalt concrete pavement, as well as the regeneration of old asphalt pavement recycled materials after adding asphalt, water and other materials; It is also used for on-site mixing of stabilized soil at the grassroots and bottom layers of highways, urban and rural roads, airports, docks, parking lots, and other projects.