公司新聞
冷再生機水泥路面施工技術有什么特點？
來源：http://www.xintangt.com/ 日期：2020-08-07
冷再生機施工的特點是大型機械密集施工和高生產率。對冷再生機械及配套設備要求是有足夠的生產能力并且處于良好的工作狀態。冷再生施工機組中比較重要的就是再生機械的選擇，決定采用哪種再生機械主要工程規模和再生類型的影響。就地冷再生機是目前使用比較廣泛的機械，下面主要介紹它在水泥就地冷再生施工過程中的機械配置和施工前的準備工作。
The construction of cold recycling machine is characterized by intensive construction of large machinery and high productivity. The requirement of cold regeneration machinery and supporting equipment is to have enough production capacity and be in good working condition. In the cold recycling construction unit, the selection of recycling machinery is more important, which kind of recycling machinery is used, the main engineering scale and the influence of regeneration type. The cold in place recycling machine is widely used at present. The following mainly introduces its mechanical configuration and preparation before construction in the process of cement in situ cold recycling construction.
冷再生機租賃中罐車是再生機德的配套設備，用來供水或者液體穩定劑。罐車的容量要與日工程量和道路現狀匹配。在水泥就地冷再生施工過程中，要求有至少2臺水罐車給再生機提供施工用水。補充水的水罐車數量取決于水消耗速度和水源遠近，以實現快速工作效率。
The tank car in the lease of cold regenerator is the auxiliary equipment of regenerator, which is used for water supply or liquid stabilizer. The capacity of the tank car should match the daily engineering quantity and the current situation of the road. In the construction process of cement cold recycling, at least two water tankers are required to provide construction water for the regenerator. The number of water tankers for make-up water depends on the speed of water consumption and the distance of water source, so as to achieve rapid work efficiency.
冷再生機租賃對重型壓路機對新再生層底部達到要求的壓實度有重要作用，因而其選擇非常關鍵。在應用就地冷再生機施工過程中需要單鋼輪壓路機進行壓實。單鋼輪振動壓路機可以進行強弱振動選擇。
The lease of cold recycling machine plays an important role in the heavy-duty roller to achieve the required compaction degree of the new regeneration layer bottom, so its selection is very important. In the construction process of application of cold in place recycling machine, single steel wheel roller is needed for compaction. The single drum vibratory roller can select the strong and weak vibration.
以上是關于冷再生機在水泥路面的技術施工特點，希望對大家有所了解，想要了解更多相關內容歡迎點擊冷再生機租賃http://www.xintangt.com官網！
The above is about the technical construction characteristics of cold recycling machine in cement pavement. I hope you can understand it. If you want to know more about it, please click on the rental of cold recycling machine http://www.xintangt.com Official website!
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：